52 & 54, Jalan Perniagaan 1,
Pusat Perniagaan Alma,
14000 Bukit Mertajam,
Pulau Pinang, Malaysia.
+604-552 3188
+604-552 3189
- High Bay
- High Bay Food Grade
- Flood Light
- High Mast
- Street Light
- Explosion Proof Lighting
- Tri Proof
- LED Solar Light
- LED T8 Tube
- LowBay / Canopy Light
EGE Technology Sdn Bhd
52 & 54, Jalan Perniagaan 1,
Pusat Perniagaan Alma,
14000 Bukit Mertajam,
Pulau Pinang, Malaysia.
52 & 54, Jalan Perniagaan 1,
Pusat Perniagaan Alma,
14000 Bukit Mertajam,
Pulau Pinang, Malaysia.
LED Liner High Bay T31B
| Previous | 2 / 3 | Next |
The T31B is a modern and energy efficient fixture designed for high rack warehouses and storage areas with narrow aisles. Several beam angle choices allow you to find a fitting solution for any situation. With a narrow beam angle like 30°or 30°x70°. You can install the fixture in up to 35-40m height, while a wider 40°x130° lens would give you an optimal light distribution for long and narrow aisles.
Beam Angles
Simulation Reference
To better show you how the beam angles choice can influence the light distribution, we made a Dialux simulation to demonstrate the differences. Below you find 3 similar scenarios of a warehouse with 10m ceiling height and 8m high racks. The aisles between the racks are 4m, 3m and 2m wide. It becomes obvious that the 30x70° lens beams down the most light. For high ceilings and/or narrow aisles this is your best bet.
Remark: Detail and specification are current at the time of publication but may be changed without prior notice
Model & Specification
Installations Method
.jpg)
Remarks: Detail and specification are current at the time of publication but may be changed without prior notice.jpg)
With a power range from 100W up to 600W and an efficiency of around 130lm/w, this fixture can maximize your governmental rebates and minimize your customer’s power consumption. The robust and durable aluminum housing assures excellent heat distribution. Thanks to an ingress rating of IP65 it is suitable for indoor and outdoor use under all conditions. Suspended or surface mounted it will provide a perfectly homogenous light distribution and therefore more safety in warehouse.
Application:
Application:
- Widely used in Warehouse, Manufacturing Plant, Mall, Department Store and etc.
- High Strength aluminium alloy material, electrophoresis and powder coating with strong anti-corrosion treatment surface finishing.
- Integrated housing design with heat sink to allow for excellent heat Dissipation.
- Power range available from 100W to 600W.
- Installation heights up to 30 meters.
- Multiple beam angle for different applications with Low Glare optical PC Len cover for the best performance in the lighting distribution.
- High Efficacy at>130 LM/W with Original Lumileds Chips, certified LM80 & TM-21 is available.
- Ingress Protection: IP65 Weatherproof suitable for Indoor and outdoor use.
- Quick and easy to install and with optional motion and daylight sensor.
Beam Angles
The illustration below shows the different light distributions for our beam angle options. The symmetric beam angles are ideal for wide and open areas such as production halls or storage areas with lower racks. The light gets distributed very evenly across a circular area below the fixture.
For warehouses with high racks the asymmetric beam angles are the better choice. The emitted light is precisely spread out along the aisles without wasting it on top of the racks. With currently 8 different beam angle option a fitting solution for every area of application can be easily found.
.jpg)
To better show you how the beam angles choice can influence the light distribution, we made a Dialux simulation to demonstrate the differences. Below you find 3 similar scenarios of a warehouse with 10m ceiling height and 8m high racks. The aisles between the racks are 4m, 3m and 2m wide. It becomes obvious that the 30x70° lens beams down the most light. For high ceilings and/or narrow aisles this is your best bet.
The 40x130° lens shows excellent results for midrange ceiling heights and long aisles. It will allow for near perfect light distribution in most warehouse types. The 60x90° lens turn out to be a very good choice for wider aisles and midrange ceiling heights.
.jpg)
Remark: Detail and specification are current at the time of publication but may be changed without prior notice
| Electrical & Mechanical Protection Function | |
|
|
|
|
|
|
|
|
|
|
Model & Specification
| POWER RATING (W) | EGE-LH100 / 120-T31B | EGE-LH150/180-T68 | EGE-LH200/240-T31B | EGE-LH400-T31B | |
| Input Voltage | AC100 ~ 277V | ||||
| Frequency | 50 / 60 Hz | ||||
| Power Factor | >0.95 | ||||
| Working Temp | - 30°C ~ + 50°C | ||||
| CRI | Ra ≥ 70 | ||||
| Luminous Flux (LM) | 13000 / 15600 | 19500/23400 | 26000/31200 | 52000 | |
| Lamp Luminous | 130 ±5 LM/W | ||||
| Color Temp | 3000K, 4000K, 5000K, 6000K. | ||||
| LED Source | Lumileds 3030 | ||||
| LED Driver | Tomcarline | ||||
| IP Rating | IP 65 | ||||
| Beam Angle | 30°/60°/90°/120°/ 30*70°/60*90°/ 40*130°/90*120° | ||||
| Lifespan | ≥ 50000 Hours | ||||
| Material | Aluminum Alloy / PC | ||||
| Certificates | TUV, CB , CE, D-Mark, UL, DLC, SAA, C tick. | ||||
| Dimension (MM) | 600*130*130 | 890*130*130 | 1180*130*130 | 1180*270*135 | |
| Weight | 4.0 | 5.5 | 7.0 | 14.3 | |
Installations Method
Remarks: Detail and specification are current at the time of publication but may be changed without prior notice